How to Reset BMW ELV when battery registration failure?

Problem:
it’s already happened to one of you that you can’t register the new battery with ista? and the steering lock light in yellow lights up, it’s impossible to reset the elv.

Solution:
E Model you can use NCS (you find Battery Capacity in cas) ELV you can use tool 32 (please open cas.prg)

If you only changed battery with the new one with the same capacity, then do this:
*Tool32:
SGBD: (Choose DME or DDE) “Steuren_batterietausch_registri Start job once
If you changed the capacity or type: *Change E-word in VO of the car by NCSEXPERT, write FA and code CAS
Alternatively use esys for F serie and code CAS/FEM
Then try to reset ELV counter and CAS in ISTA or Tool32 .
loading..

Problem:

I had error when programming BMW F32 in ISTA-P 4.19.13 Expert Mode.

Error:

Vehicle programming with ISTA/P is no longer approved for the connected vehicle.
Vehicle management is now only possible with ISTA-D.

*Before version ISTA 4 it was called ISTA/D (aka Rheingold).
It would cover diagnosis on all cars.
Beginning from version 4 its called ISTA+.

Obd2tool.com Solution:
The error indicates that  BMW F, I, G series programming is not available in ISTA-P (since version 4.19.xx), but in ISTA+ instead.
From version 4, besides diagnosis it also covers programming of F series.
and ISTA/P is left for programming of E series only (therefore ISTA/P can not program F series anymore).
Here’re tips to set up programming in ISTA+ ( Rheingold or ISTA-D).
Run ISTA+ software, identify vehicle
Then choose Service Plan
(click to enlarge images)

Choose Programming Plan

Then Execute measures plan

Follow ISTA prompts to carry out programming.

The latest BMW ICOM ISTA+ goes to 2020.03 ISTA-D 4.21.30
loading..

Problem:

I had error when programming BMW F32 in ISTA-P 4.19.13 Expert Mode.

Error:

Vehicle programming with ISTA/P is no longer approved for the connected vehicle.
Vehicle management is now only possible with ISTA-D.

*Before version ISTA 4 it was called ISTA/D (aka Rheingold).
It would cover diagnosis on all cars.
Beginning from version 4 its called ISTA+.

Obd2tool.com Solution:
The error indicates that  BMW F, I, G series programming is not available in ISTA-P (since version 4.19.xx), but in ISTA+ instead.
From version 4, besides diagnosis it also covers programming of F series.
and ISTA/P is left for programming of E series only (therefore ISTA/P can not program F series anymore).
Here’re tips to set up programming in ISTA+ ( Rheingold or ISTA-D).
Run ISTA+ software, identify vehicle
Then choose Service Plan
(click to enlarge images)

Choose Programming Plan

Then Execute measures plan

Follow ISTA prompts to carry out programming.

The latest BMW ICOM ISTA+ goes to 2020.03 ISTA-D 4.21.30
loading..

MB SD Connect C4 C5 C6 newest version software is V2020.02.03

Please kindly note :

1.Including Super Engineer Software: DTS monaco V8.14.016 And Vediamo V5.01.01 Support Offline Programming

2.Support Wireless

3.Software Version: V2020.03

HardwareVerison:OS:2.3 CSD:2.11

4.Support Multi-Language: (Default language is English, if you want other languages, please leave message)

English/Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Serbo-Croatian/Turkish/Czech/German/Finish/Hyngarian/Japanese/Dutch/Portuguese/Russian/Swedish/Chinese.

5.Support Both Mercedes Benz Cars and Trucks

6.Support Mercedes Benz Cars After Year 2000

7.Support Offline and Online Programming, If You Want to Do Online,you must have an account online. Buy This Online SCN Coding Service

MB Star C4 C5 C6 Softwares list:

1. DAS 2020.03: the automatically Diagnosis Assistance System
2. Xentry 2020.03: New software released by Bennz Company after 04/2009 by diagnosis new cars.
3. WIS net 2019.07:Workshop Information System

Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.

4. EPC.net 2018.11:Electronic Parts Catalog
5. ST Finder:Part Location Finder options: 2008 and 2016
6. STARUTILITIES :the movement management system and self-test
7. SD MEDIA 2014
8. PL73

9.HHT Software for old cars

10.Engineer version Vediamo updated to V5.01.01 ，Engineer version DTS updated to V8.14.016，Upgrade to the latest version of 2019 data

1) Fix the error that Mercedes-Benz DAS cannot directly call WIS

2) Join the DAS sedan smart offline programming

3) Join the 204 DAS stand-alone version, which can be mutated (German), which is more powerful than Vediamo

4) Join DAS special function password-free access PKW and SMART

5) Repair SMART 450, 451, 452, 454 No longer need TAN Caculator, all offline

6) Increase offline EOL and VMAX all LKW, modify truck maximum speed limit

7) Lift the truck NOx TORGUE restriction, do not need FDOK XT calculation code, directly enter, directly cancel the legal speed limit, you can modify without special function

8) Clear the truck SCR/ADBLUE fault code (MR), do not need FDOK XN calculation code, enter directly

9）Add DAS 212，207 prototyp model

10）Add Xentry special features and the VeDoc calculator($53 for activation)

MB SD Connect Compact software display: